APLICAÇÃO DO THROUGHPUT DIAGRAM: UMA FERRAMENTA DE ANÁLISE DAS DECISÕES DE PLANEJAMENTO E CONTROLE DE PRODUÇÃO
DOI:
https://doi.org/10.24325/issn.2446-5763.v5i14p112-129Keywords:
Planejamento e Controle da Produção; Throughput diagram; Confiabilidade de entrega.Abstract
The main objective of this paper is to present the concepts of the throughput diagram (TD), as well as the application of this tool can contribute to analyze how the Production Planning and Control (PCP) decisions influence the delivery reliability. For the application of TD, a single case study was carried out in an aircraft maintenance company. The application of TD allowed an aggregate view of order behavior over time, which made it easy to see how CFP decisions affect performance. The case study made it possible to identify through TD that the decision that most influenced the behavior of orders was the release process that impacted the reduction of lead time and the accumulated delay of orders. Future research should include a longer review period to see how these decisions influence delivery dates over time.
Downloads
Download data is not yet available.
References
BECHTE, Wolfgang. Load-oriented manufacturing control just-in-time production for job shops. Production Planning & Control, v. 5, n. 3, p. 292-307, 1994.
BECHTE, Wolfgang. Theory and practice of load-oriented manufacturing control. The International Journal of Production Research, v. 26, n. 3, p. 375-395, 1988.
EISENHARDT, Kathleen M. Building theories from case study research. Academy of management review, v. 14, n. 4, p. 532-550, 1989.
KINGSMAN, Brian; HENDRY, Linda. The relative contributions of input and output controls on the performance of a workload control system in make-to-order companies. Production planning & control, v. 13, n. 7, p. 579-590, 2002.
LAND, M.; GAALMAN, G. Workload control concepts in job shops a critical assessment. International Journal of Production Economics, v. 46, p. 535-548, 1996.
LAND, Martin Jaap et al. Workload control in job shops, grasping the tap. University Library Groningen, 2004.
LEONARD-BARTON, Dorothy. A dual methodology for case studies: Synergistic use of a longitudinal single site with replicated multiple sites. Organization science, v. 1, n. 3, p. 248-266, 1990.
MIGUEL, P. A. C. Estudo de caso na engenharia de produção: estruturação e recomendações para a sua condução. Revista Produção; v. 17, n. 1, p. 216-229, 2007.
SCHMENNER, Roger W.; SWINK, Morgan L. On theory in operations management. Journal of Operations Management, v. 17, n. 1, p. 97-113, 1998.
SOEPENBERG, G. D.; LAND, M. J.; GAALMAN, G. J. C. A framework for diagnosing the delivery reliability performance of make-to-order companies. International Journal of Production Research, v. 50, n. 19, p. 5491-5507, 2012.
SOEPENBERG, G. D.; LAND, Martin; GAALMAN, Gerard. The order progress diagram: A supportive tool for diagnosing delivery reliability performance in make-to-order companies. International Journal of Production Economics, v. 112, n. 1, p. 495-503, 2008.
STEVENSON, Mark; HENDRY, Linda C.; KINGSMAN†, B. G. A review of production planning and control: the applicability of key concepts to the make-to-order industry. International journal of production research, v. 43, n. 5, p. 869-898, 2005.
STUART, I.; MCCUTCHEON, D.; HANDFIELD, R.; MCLACHLIN, R.; SAMSONS, D. Effective case research in operations management: a process perspective. Journal of Operations Management, v. 20, n. 5, p. 419-433, 2002.
THÜRER, M.; GODINHO FILHO, M. Redução do lead time e entregas no prazo em pequenas e médias empresas que fabricam sob encomenda: a abordagem Workload Control (WLC) para o Planejamento e Controle da Produção (PCP). Gestão e Produção, v. 19, n. 1, 2012.
VOSS, Chris; TSIKRIKTSIS, Nikos; FROHLICH, Mark. Case research in operations management. International Journal of Operations & Production Management, v. 22, n. 2, p. 195-219, 2002.
WIENDAHL, H. Load-Oriented Manufacturing Control. Berlim, Alemanha: Springer-Verlang.1995.
YIN, Robert K. Case study research: Design and methods, revised edition. Applied Social Research Methods Series, v. 5, 1989.
ZONTA, L. Propostas de melhorias no planejamento e controle da produção de uma empresa de manutenção aeronáutica. 2013. 77p. Monografia (Especialização em Engenharia de Produção) - Departamento de Engenharia de Produção, Universidade de São Paulo, São Carlos, 2012.
BECHTE, Wolfgang. Theory and practice of load-oriented manufacturing control. The International Journal of Production Research, v. 26, n. 3, p. 375-395, 1988.
EISENHARDT, Kathleen M. Building theories from case study research. Academy of management review, v. 14, n. 4, p. 532-550, 1989.
KINGSMAN, Brian; HENDRY, Linda. The relative contributions of input and output controls on the performance of a workload control system in make-to-order companies. Production planning & control, v. 13, n. 7, p. 579-590, 2002.
LAND, M.; GAALMAN, G. Workload control concepts in job shops a critical assessment. International Journal of Production Economics, v. 46, p. 535-548, 1996.
LAND, Martin Jaap et al. Workload control in job shops, grasping the tap. University Library Groningen, 2004.
LEONARD-BARTON, Dorothy. A dual methodology for case studies: Synergistic use of a longitudinal single site with replicated multiple sites. Organization science, v. 1, n. 3, p. 248-266, 1990.
MIGUEL, P. A. C. Estudo de caso na engenharia de produção: estruturação e recomendações para a sua condução. Revista Produção; v. 17, n. 1, p. 216-229, 2007.
SCHMENNER, Roger W.; SWINK, Morgan L. On theory in operations management. Journal of Operations Management, v. 17, n. 1, p. 97-113, 1998.
SOEPENBERG, G. D.; LAND, M. J.; GAALMAN, G. J. C. A framework for diagnosing the delivery reliability performance of make-to-order companies. International Journal of Production Research, v. 50, n. 19, p. 5491-5507, 2012.
SOEPENBERG, G. D.; LAND, Martin; GAALMAN, Gerard. The order progress diagram: A supportive tool for diagnosing delivery reliability performance in make-to-order companies. International Journal of Production Economics, v. 112, n. 1, p. 495-503, 2008.
STEVENSON, Mark; HENDRY, Linda C.; KINGSMAN†, B. G. A review of production planning and control: the applicability of key concepts to the make-to-order industry. International journal of production research, v. 43, n. 5, p. 869-898, 2005.
STUART, I.; MCCUTCHEON, D.; HANDFIELD, R.; MCLACHLIN, R.; SAMSONS, D. Effective case research in operations management: a process perspective. Journal of Operations Management, v. 20, n. 5, p. 419-433, 2002.
THÜRER, M.; GODINHO FILHO, M. Redução do lead time e entregas no prazo em pequenas e médias empresas que fabricam sob encomenda: a abordagem Workload Control (WLC) para o Planejamento e Controle da Produção (PCP). Gestão e Produção, v. 19, n. 1, 2012.
VOSS, Chris; TSIKRIKTSIS, Nikos; FROHLICH, Mark. Case research in operations management. International Journal of Operations & Production Management, v. 22, n. 2, p. 195-219, 2002.
WIENDAHL, H. Load-Oriented Manufacturing Control. Berlim, Alemanha: Springer-Verlang.1995.
YIN, Robert K. Case study research: Design and methods, revised edition. Applied Social Research Methods Series, v. 5, 1989.
ZONTA, L. Propostas de melhorias no planejamento e controle da produção de uma empresa de manutenção aeronáutica. 2013. 77p. Monografia (Especialização em Engenharia de Produção) - Departamento de Engenharia de Produção, Universidade de São Paulo, São Carlos, 2012.
Downloads
Published
2019-08-31
How to Cite
Kodama, T. K., Paredes, F. J. G., & Godinho Filho, M. (2019). APLICAÇÃO DO THROUGHPUT DIAGRAM: UMA FERRAMENTA DE ANÁLISE DAS DECISÕES DE PLANEJAMENTO E CONTROLE DE PRODUÇÃO. South American Development Society Journal, 5(14), 112. https://doi.org/10.24325/issn.2446-5763.v5i14p112-129
Issue
Section
Artigos
